NextLevel Production Services

Event Production Planning Checklists

Updated

Six working checklists cover an event from scope lock through strike. Each list lives on its own page so the right stakeholder can use the exact checklist they need without scrolling through unrelated phases. Start with the master timeline, then layer in the venue, walk-through, day-of, coordination, and outdoor lists as the project demands.

Which checklist to use when

Each checklist is built for a specific moment in the planning cycle. Run them in roughly this order, but use whichever apply to your event type.

Event production checklists by planning moment
Checklist When to run it Primary owner Open
Event Production Checklist 4 weeks out through post-event strike. The master timeline. Production lead Open
Venue Event Checklist During venue contracting and again 2–3 weeks before load-in. Planner and venue contact Open
Pre-Event Walk-Through Checklist Onsite, 1–2 weeks before show. Sometimes day-before for fast turnarounds. Production lead with venue contact Open
Day-Of Event Operations Checklist Crew call through strike closeout. Stage manager / show caller Open
Venue AV Coordination Checklist Two-sided checklist for planner and venue team kickoff. Planner and venue operations Open
Outdoor Event AV Checklist Use in addition to the master list whenever the event is outdoors. Production lead Open

Why we split these into separate pages

A single mega-checklist looks thorough on paper and fails in practice. Stakeholders skim, miss the items that apply to them, and treat the document as reference rather than action. Splitting by phase keeps each list short enough to actually run line by line, and short enough to send to the one person who owns that phase. Venue contacts only need the venue and walk-through lists. The stage manager works the day-of list. The production lead owns the master timeline and uses the others as inputs.

How to combine them on a real project

Most corporate meetings, school events, and venue programs use four of the six lists: the master production checklist, the venue checklist, the walk-through, and day-of operations. Add the venue coordination checklist whenever there are two teams to align (in-house venue ops plus an outside planner or production company). Add the outdoor checklist whenever any part of the event is outside, including outdoor receptions attached to indoor programs.

  1. 4 weeks out. Run the master Event Production Checklist. Use the Venue Event Checklist to verify hard constraints in writing.
  2. 2–3 weeks out. Update the master checklist with any venue or scope changes. Distribute the Venue AV Coordination Checklist if planner and venue are separate teams.
  3. 1–2 weeks out. Run the Pre-Event Walk-Through Checklist onsite with venue, planner, and production lead together.
  4. Show day. Run the Day-Of Event Operations Checklist from crew call through strike. Use the Outdoor Event AV Checklist alongside it whenever the event is outside.

What every checklist has in common

Each list shares three rules that protect the program:

Common planning mistakes the checklists catch

Which option fits best?

The right fit depends on event size, venue or site conditions, available staffing, technical complexity, and how hands-on you want your team to be on event day.

Rentals Only

Best for straightforward events when you know what you need and your team can handle setup and operation. This is usually the lowest-cost path, with your team responsible for testing the equipment and running it on event day.

Hybrid Support

Best when professionals should deliver, set up, and test a simpler system that your team or venue staff will operate. This reduces setup risk compared with DIY and typically costs less than full-service production. Operating the system still requires some technical knowledge.

Full-Service AV / Production

Best when timing, coordination, and reliability matter, especially when multiple systems must work together. Onsite operators handle the technical execution, giving your team the least hands-on involvement during the program.

For equipment you own, consulting and training can help your team operate it confidently.

Recommended Next Step

The right support model depends on event size, venue, staffing, and how hands-on you want to be. Browse related rentals if you know the gear list. Ask for a recommendation if you are sizing scope or comparing approaches. Request a quote when you need delivery, setup, onsite operators, or full production.

Browse Related Rentals Ask for a Recommendation Request a Quote

Related pages